Whole Home Pipe Replacement in Keller

Rust-colored water hits the bathroom sink. A damp spot spreads behind the laundry room drywall. Your third pinhole leak this year just showed up in the guest bath.

Mother's whole home repipe service replaces failing polybutylene and CPVC water lines with modern PEX, installed by licensed plumbers who minimize wall damage and restore your system in days. One project. One solution. No more chasing leaks while juggling tournament schedules and work deadlines. 

Pipe damage doesn’t wait. Whether it’s noon or 3 am, we’re here to answer the phone.

Call Mother 24/7 for a full-home assessment.

Warning Signs Your Keller Home Needs Repiping

Your home's plumbing doesn't fail all at once. It sends signals first.

• Discolored water from multiple faucets. When rust-colored water shows up at more than one fixture, the pipe walls themselves are corroding. That's your galvanized supply lines dissolving into your family's water.
• Pressure drops throughout the house. Mineral scale and corrosion build up inside pipe walls over decades, choking flow. Your 1998 Hidden Lakes home didn't always take this long to fill the bathtub.
• Pinhole leaks in different locations. One pinhole leak is a repair. When copper or CPVC develops pinholes in the master bath and the kitchen within the same year, you're not dealing with bad luck. You're dealing with system-wide material failure.
• Metallic taste in your drinking water. This is your pipe material making it into your water supply.
• Green or white buildup on exposed pipes under sinks. Mineral deposits forming on the outside of supply lines signal corrosion activity inside them.
• Water temperature swings during showers. Pressure imbalance from degraded supply lines causes hot and cold fluctuations mid-shower.
• Banging sounds in walls when fixtures run. Water hammer in aging lines indicates pressure irregularities in your supply system.

One leak is a repair. Multiple leaks across different fixtures means the system itself is telling you something.

Why Keller Homes Built Before 2000 Are Hitting the Same Wall

Keller's building boom created a shared timeline that thousands of homeowners are living through right now.

Between 1985 and 2000, Keller grew from a small town into a full suburb. Hidden Lakes, Brentwood Estates, Marshall Ridge, and dozens of other neighborhoods went up fast. Builders used the materials standard to the era - polybutylene supply lines from the late 1970s through 1995, and early-generation CPVC. Those materials are now 25 to 40 years old, and they're failing across the city at the same time.

The timeline most Keller homes follow looks like this: the first 15 years, pipes perform normally. Years 15 through 25, Keller's water chemistry begins degrading pipe walls from the inside. Past 25 years, brittleness, pinhole leaks, and sudden failures become routine.

If your home was built during Keller's growth years, your neighbors in Heatherwood Estates and Brentwood Estates are dealing with the exact same pipe problems. This isn't coincidence. It's chemistry and time catching up at the same pace across an entire generation of homes.

What Keller's Water Does to Aging Pipes

The City of Keller purchases water from Fort Worth. That water is treated with chloramine - a combination of chlorine and ammonia used for disinfection. Chloramine is safe to drink. It is not safe for certain pipe materials that were standard in homes built before 2000.

Polybutylene - the gray plastic supply lines installed through most of the 1980s and into the mid-90s - is the most vulnerable. Chloramine attacks polybutylene from the inside out. Micro-fractures develop invisibly until the pipe fails without warning. There is no repair for polybutylene. Full replacement is the only solution.

CPVC, the cream-colored rigid plastic common in late 1990s construction, has a different failure pattern. It becomes brittle over time, especially in attic installations where Keller's summer heat and temperature swings stress the material repeatedly. A CPVC line that looks fine from the outside can crack under normal water pressure once it reaches a certain age.

Keller's water also tests moderately hard - 5 to 10 grains - with a slightly scale-forming pH. That combination of chloramine, heat cycling, and mineral content is why your pipes are where they are.

The Mother Whole Home Repipe Process

Mother approaches repiping the same way you approach a complex project at work: mapped out in advance, executed on schedule, with no surprises mid-job.

• Assessment and line mapping. We start with a full evaluation of your existing water supply lines - material types, routing through walls and ceilings, and current condition. You know exactly what's inside your walls before any work begins.
• Strategic access point planning. We plan every wall opening before cutting starts, targeting junction points that minimize total penetrations. For Keller's slab-on-grade foundations, we route new lines through attic space and interior walls wherever possible. This approach avoids the tunneling costs that come with under-slab access - savings that go directly back in your pocket.
• PEX installation with a home-run manifold. New PEX supply lines run from a central manifold to each fixture individually. Every fixture gets its own shutoff valve, which means a future leak can be isolated without killing water to the whole house. Fewer connections inside walls means fewer potential failure points where a problem can develop.
• Pressure testing before walls close. We pressure test the entire new system before patching a single opening. Every connection verified. Every line confirmed leak-free. Water service restores the same day whenever possible - because you've got a 6 AM practice tomorrow and people coming over Friday.
• Wall restoration. Access points are patched and textured when we leave. Your home looks like your home, not a job site.

Why PEX Is the Right Material for North Texas

PEX is flexible enough to handle thermal expansion without stress fractures - important in a climate that swings from 105-degree August afternoons to hard freeze winters. It resists the chloramine degradation that destroys polybutylene. It carries a 25-plus year expected lifespan under normal conditions, and it requires fewer fittings than rigid pipe systems, which means fewer potential failure points inside your walls.

PEX costs less than copper, installs faster, and handles North Texas conditions better than the materials it replaces. It's the right pipe for this climate and this water chemistry.

Permits and Warranty

The City of Keller requires permits for whole home repiping. Mother pulls all permits, coordinates inspections, and ensures the work meets current code requirements. You don't visit City Hall or track down inspectors.

Our warranty covers labor, workmanship, fittings, connections, and material defects - in writing. When you sell your Hidden Lakes or Marshall Ridge home down the road, you'll have complete documentation showing the repipe was done right.

The Foresight That Keeps Your Home Running

You've built a household that runs on precision. Schedules get met. Problems get solved before they become emergencies. That's not luck - that's how you operate.

Repiping your home now is that same mindset applied to your aging water lines. It eliminates the emergency leak that pulls you off a work trip. It protects the floors, drywall, and belongings you've invested in. And it puts modern materials inside your walls that are built for the water chemistry and climate you actually live in - not the standards of 1992.

One project. Completed in a few days, not weeks. Decades of protection.

Call Mother for a full-home pipe assessment. We'll show you exactly what's inside your walls and give you a straight answer on what it takes to fix it.